LUMii – X LED Controller
£60.00
The LUMii XLED Controller is designed to control the LUMii XLEDv6 680w LED fixture but can control any LED fixture which accepts 0-10V control signal. When connected to an RJ12 port, (or by wired connection to push-in terminals) it will schedule a desired daily photoperiod, control the light intensity (dimming) from 0% to 100%, and set the length of sunrise and sunset ramping. With its single channel, it will control a linked array of up to 25 LUMii XLEDv6 680w LED fixtures. The controller uses a very simple five-button control interface with LED display. It has an integral wall mounting / hanging tab and is powered from mains electricity via an adaptor plug (supplied).
1 in stock
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Heavy Duty Timer
The only timer capable of switching up to 600w HPS or Metal Halide lamp without the need for a separate contactor unit. Simply plug your ballast straight into the timer and set your on/off times on the segments (each segment is 15 mins). Also the reliable safe way to switch your CFL lamps, up to 1500w!
Lumii 315w Solar CDM
Lumii HID to CFL Converter
The LUMii HID to CFL Converter allows IEC reflector leads to convert to a UK plug lead, this allows self-ballasted lamps like Compact Fluorescent Lamps (CFLs) to be plugged straight into mains power. This pack contains a short lead to convert the supplied IEC to a conventional power supply, as well as a unique support device, for use with the LUMii Maxii reflector, to support the weight of a CFL and keep the lamp horizontal.
Maxibright – Daylight 200w LED
Maxibright T5 Fluorescent light
- The T5 2ft x 2 Lamp unit Dimensions: 60cm x 23cm x 6cm Lamps: 2x 2ft lamps (24w each) - 3500+ lumens (48watts)
- The T5 2ft x 4 Lamp unit Dimensions: 60cm x 40cm x 6cm Lamps: 4x 2ft lamps (24w each) - 7000+ lumens (96watts)
- The T5 4ft x 4 Lamp unit Dimensions:120cm x 40cm x 6cm. Lamps: 4 x 4ft lamps (54w each) - 17,000+ lumens (216watt)
- The T5 4ft x 8 Lamp unit Dimension: 120cm x70cm x 6cm. Lamps: 8x 4ft lamps (54w each) - 34,000+ lumens (432watt). This unit is switchable down to four lamps (centre) for optimum efficiency.
Sun King Parabolic Reflector
- Â Â Â Superb, uniform light spread
- Â Â Â Constructed from premium grade components
- Â Â Â Eliminates hotspots
- Â Â Â Kettle lead for simple connection to ballasts
- Â Â Â Vented top section to reduce heat build-up
- Â Â Â Can be kept closer to the top of the canopy than standard reflectors
- Â Â Â Highly reflective hammer-tone finish
- Â Â Â Can be used with both CFLs and HID lamps
Sunmaster Sodium Dual Spectrum Lamps
Wide Spread 6″ Cool Tube
The Coolshade Reflector.
The Coolshade is an air-tight, fully sealed clear glass tube with a lamp mounting bracket in its centre. It's perfect for removing the excess heat generated by HID grow lights without leaking unpleasant odours; as far as we know it's the only fully sealed system on the market (other manufacturers claims that theirs are but in our experience they are definitely not).
Reviews
There are no reviews yet.