Lumii 315w Solar CDM
With blinding intensity, the LUMii Solar 315w CDM Lamps deliver a light spectrum that mimics that of natural sunlight indoors and plant's love it. Not only do the LUMii Solar 315w CDM Lamps run with incredibly intensity they offer your plants greater levels of plant useable light, that can be lacking in other lamps due to their full spectrum profile. The LUMii Solar 315w CDM Lamps are available in two specific spectrums, covering both the growing and blooming phase of a plants life cycle, resulting in happier plants with bumper harvests of superior quality end product.
Lumii Aerotube Cooltube Reflectors
Cooltube reflectors have long been a favourite of growers, and for good reason: they reduce the risk of heat damage caused by high intensity discharge lighting. This reflector is beneficial in keeping your temperature at a constant level, and stops extreme heat from destroying all your hard work. They remove 90% of the heat from your chosen lamp and increase maximum rated lumen delivery.
The Aerotube reflector is air-tight, with a fully sealed glass tube for your lamp to be mounted in. The external 2-part reflector is clipped on to the top of the cool tube, and is easily assembled.
Lumii Black – 720W LED With Ballast
If you need good quality LED lighting at the best price, the LUMii BLACK 720W LED 6 Bar Fixture is a great choice!
Powered and controlled by the LUMii BLACK 600W Electronic Ballast (sold separately, or with the LED Fixture as a kit), this high-performing, high-efficiency LED 6 Bar Fixture can be used singly or as part of a lighting array. Lightweight and easy to install, if hung by means of LUMii Rope Ratchets the height of the fixture can be adjusted as your plants grow.
Lumii Black 2 – 720w/960w LED
This LED grow light fixture has a stunning operating efficacy of around 2.9 µmol/J, and is built using LED chips with individual efficacies of 3.4 - 3.7 µmol/J. It’s maximum PPF output is an impressive 2596 µmol/s when powered at 960 W (by two ballasts each drawing 480 W). By comparison, a 1000 W HPS lamp (drawing 1070 watts) will typically give an output of 1550 µmol/s PPF.
A very versatile, high-performing, high-efficiency mid-range LED fixture. Lightweight owing to not having an integral driver, it is easy to install. The fixture is made up of two interlocking halves, each having its own power input socket, and it can be hung either as a single interlocked 6-bar fixture or as 2 separate 3-bar fixtures. The 6-bar fixture is ideally suited to cover a growing area of 1.5 m x 1.5 m, whereas 2 separate 3-bar fixtures can cover a growing area up to 25% larger.
Whether hung separately or interlocked, the 2 half-fixtures can be powered by a single LUMii BLACK 600 W Electronic Ballast using the splitter lead provided. Alternatively, each half fixture can be powered by its own LUMii BLACK 600W Electronic Ballast. Using 2 ballasts allows the maximum light output of the fixture/s to be increased by at least 25%.
A single ballast can be mounted on the 6-bar fixture, using brackets provided, but if the fixture is hung as 3-bar fixtures, or if 2 ballasts are used, they must be positioned remotely. The open construction of the fixture/s and the very low heat output assist airflow and heat management. Producing full spectrum light ideal for both growth and bloom, the LUMii BLACK² 720/960 LED will give impressive results.
Lumii Black 4 Way Contactor Timer
The LUMii BLACK contactor timer is a simple and cost-effective solution for grow light scheduling, ensuring that plants get the optimum levels of lighting throughout the day. The mechanical timer is easy to programme in 15-minute increments, while the relay switch safely turns on HID lights without causing a power surge or overloading the timer.
The lightweight, flexible power bars take up to 13 Amps each (available in 4-way and 8-way), for maximum efficiency we recommend running no more than:
• 3 x 600 W per 4-socket power bar
• 4 x 400 W per 4-socket power bar
• 4 x 315 W per 4-socket power bar
To set up, simply push the timer pins down to indicate “ON” periods, centrally position the ON/OFF switch onto “timer” mode, plug in ballasts to the 4-socket power bars and plug both contactor timer plugs into 2 x 13 Amp mains supplies sockets.
LUMii Extension/Link Lead – 1.5m
LUMii Grow Room Glasses
Lumii HID to CFL Converter
The LUMii HID to CFL Converter allows IEC reflector leads to convert to a UK plug lead, this allows self-ballasted lamps like Compact Fluorescent Lamps (CFLs) to be plugged straight into mains power. This pack contains a short lead to convert the supplied IEC to a conventional power supply, as well as a unique support device, for use with the LUMii Maxii reflector, to support the weight of a CFL and keep the lamp horizontal.
LUMii Reflector with Adjustable Light Fitting
Maxibright – 600w Super Bloom Hps Bulb
New from Maxibright their 600w Super Bloom HID flowering lamp holds Spectral Output even when dimmed or when using ballast super lumen function due to the Par Lock feature. An excellent lamp at an excellent price.
KEY VALUES:
- Delivers 10% more light compared to standard HID lamps
- Par Lock feature creates a stable Spectral Output
- Suitable for use with magnetic and digital ballasts
- Energy efficient reducing heat created
- 90,000 Lumens
- 25% more red light compared to standard HID lamps
- PPF 1090 umol/s
Maxibright – Daylight 200w LED
More flower, less power
LED lighting technology has evolved leaps and bounds over the past few decades. As the technology has progressed, so have grower’s expectations on performance. With a full-bodied PAR spectrum output and a high total output, the DAYLIGHT 200W LED Grow Light ensures growing with LEDs will impress even the most staunch HPS supporter.