Davin DV14-K – 4 Way Contactor 4 X 600w Incl Heater Switch
The DV-14K is a timed relay box which you can use to switch a maximum of 4×600 Watt, or 5×400 watt luminaries on and off. The DV-14K also has a heater contact. Combining serenity and efficiency, all Davin products are equipped with a timer GRASSLIN, which are the most efficient on the indoor horticulture market.
Specifications
- 2 years warranty.
- Dimensions: 210x290x90mm.
- Required voltage: 230 Vac/50Hz.
- Max. Output: 15A
- Output heater: 15A
- Isolation level: IP-44
- European Plugs
Heavy Duty Timer
The only timer capable of switching up to 600w HPS or Metal Halide lamp without the need for a separate contactor unit. Simply plug your ballast straight into the timer and set your on/off times on the segments (each segment is 15 mins). Also the reliable safe way to switch your CFL lamps, up to 1500w!
Hero 8 Contactor
The Hero 8 Way Contactor Plus Heater is an 8 way contactor with two additional dedicated heat sockets.
Built with safety in mind, the Hero8 is ideal for anyone running multiple lights and heaters. It prevents electrical plug fires which can happen when a socket is overloaded. Fuses do not blow at 13 amp, they can sometimes run at over 20 amps which causes them to heat up and set the plug on fire.
With the Hero8 this does not happen, the circuit breakers built into our unit trip well before the fuses get hot saving you from any room fires.
• If the system becomes overloaded the circuit breakers will trip before your sockets melt or a power surge trips your mains supply
• The Hero 8 Way Contactor Plus Heater has two separate circuit breakers so should one become overloaded and cut out, at least four sockets will remain operational
• A timer switch allows automated control of your devices without using separate plug-ins
• Sturdy, insulated cables ensure the outer surfaces remain cool
• Maximum load: 8 x 600W digital HPS / 4 x 1000W HPS
• Heater sockets maximum load: 2500W
• Protection class: IP54
• Grasslin timer with battery back up
Lumii – Contactor Timer Panel
The Contactor Timer Panel enables scheduled operation of heavy load appliance without danger of timer contact burnout. As an electrical component, it must be installed by a qualified electrician or other competent professional to ensure compliance with relevant local regulations. Up to 12 appliances, with a combined total load of 40 amps, may be plugged into the panel and scheduled synchronously over a 24-hour period. The timer has 96 fifteen-minute on/off segments, and can be set to “timed”, “continuously on” or “continuously off”. A further 2 power outlet sockets, marked “FAN”, are not timed, and have a continuous power supply.
Key selling points:
Suitable for scheduling appliances with high inductive loads
Can schedule up to 12 appliances synchronously
2 untimed power outlet sockets
Simple to operate
Lumii Black 4 Way Contactor Timer
The LUMii BLACK contactor timer is a simple and cost-effective solution for grow light scheduling, ensuring that plants get the optimum levels of lighting throughout the day. The mechanical timer is easy to programme in 15-minute increments, while the relay switch safely turns on HID lights without causing a power surge or overloading the timer.
The lightweight, flexible power bars take up to 13 Amps each (available in 4-way and 8-way), for maximum efficiency we recommend running no more than:
• 3 x 600 W per 4-socket power bar
• 4 x 400 W per 4-socket power bar
• 4 x 315 W per 4-socket power bar
To set up, simply push the timer pins down to indicate “ON” periods, centrally position the ON/OFF switch onto “timer” mode, plug in ballasts to the 4-socket power bars and plug both contactor timer plugs into 2 x 13 Amp mains supplies sockets.
Maxibright – Sentinal 8 Way Contactor
• Sentinel CS8 GE Contactor
• Grasslin precision timed
• Compact design
• Robust high-quality powder coated metal enclosure
• Individually switched sockets with illuminated switch
• Wall or grow tent pole mountable
• Manufactured in the UK
Sentinel CS8 8 Way 26A control unit is a GE contactor with a Grasslin precision timer in a robust high-quality powder coated metal enclosure. Includes individually switchable sockets with illuminated switch. Wall or grow tent mountable for easy use. Manufactured here in the UK
MDF Contactor Board
Plug and Grow – Apex 13A Timer (4 x 600w)
Time R Digital Timer
Full of handy features and easy-to-use, the Time-R plug-in timer gives you ultra-precise levels of control over the functioning of your equipment – right down to the second if necessary!
You can trust this device to manage almost any electrical item in your grow room, from lights that typically need a broad and basic schedule (e.g. 12 hours on, 12 hours off), to water pumps that have more complicated requirements (drip feeds are normally administered following a little and often approach).
- Ultra-precise times and durations can be set – from 1 second to 99 hours
- Great for controlling grow lights, water pumps and CO2 regulatorsSimple to program thanks to the supplied instructions
- 3 different modes for setting and managing timings of equipment
- Suitable for most grow room devices (13-amp current rating)
- Large LCD display screen with green backlight that won’t disrupt plants
- Storage for your settings with a built-in rechargeable battery
- 12-hour or 24-hour clock option
- Non-fiddly buttons with a button sound on/off option
- 30-amp heavy duty relay