8 way Dripper Manifold + T Piece
The 8 Way Dripper Manifold is a very handy fitting if you are making your own irrigation system. It is great for use at the end of a line to make an end stop with outlets. You will need a short length of 16/19mm pipe after the fitting and an end stop. This will force water down each of the 6mm tubes and on to drippers or sprayers if pressure is high enough. You can also place it inline, even a few in a row if need be, to create a system with more outlets. As long as pressure is enough to deal with the branches, you can have as many as you need!
AquaTray 1M With 2 x 10mm Drain Pipes
Auto Pot – Replacement Pot
Auto Pot 6mm Black Pipe Per M
4mm Black Flexi-pipe for use with Autopot Systems. Extend or expand your system quickly and easily with extra Flexi-pipe. Purchased by the metre and cut from the roll to suit your requirements.
The Autopot 4mm Black Flexi-pipe transfers nutrient solution from an Autopot Header Tank to the Autopot themselves via filters, tee-pieces, elbow-pieces and cross connectors. The Flexi-pipe is tough, durable and flexible. It is easy to cut and the black colour ensures algae cannot grow inside the piping. The Autopot 4mm Flexi-pipe is cut by the metre to your requirements.
Autopot – 16mm – 6mm Cross Connector
Choose 6mm for older, pre-August 2020 AutoPot Watering Systems
These connectors are perfect for reducing 16mm pipe down to 9mm or 6mm pipe, when using large systems. They are inserted in-line at the point where an AQUAvalve is positioned. They provide a water tight connection unlike many other types of reduction fittings.
Autopot – 16mm – 6mm Tee Connector
Choose 6mm for older, pre-August 2020 AutoPot Watering Systems
This connector is perfect for reducing 16mm pipe down to 9mm or 6mm pipe, when using large systems. It is inserted in-line at the point where an AQUAvalve is positioned. It provides a water tight connection unlike many other types of reduction fittings.
It works in exactly the same way as the 16-9mm or 16-6mm cross connector but this fitting has one connection for 9mm or 6mm pipe whereas the cross connector provides two connections for 9mm or 6mm pipe.
AutoPot – 16mm – 9mm Cross Connector
AutoPot – 16mm – 9mm Tee Connector
AutoPot – 4 Pot Kit
Autopot – 6mm Top Hat Grommet
Choose 6mm for older, pre-August 2020 AutoPot Watering Systems
Top Hat Grommets provide a water tight connection using 9mm or 6mm pipe with the 30 & 47 L plastic reservoirs.
The Top Hat Grommet is positioned at the bottom of the reservoir. All AutoPot 30 & 47 L plastic reservoirs are now supplied drilled and with 9mm Top Hat Grommets.
If fitting a 9mm grommet (for AQUAvalve5) to an existing/non-AutoPot plastic reservoir drill out to 12.5mm diameter.
If fitting a 6mm grommet (for older, pre Aug 2020 AQUAvalves) to an existing/non-AutoPot plastic reservoir drill out to 10mm diameter.
The grommet is then inserted into the hole and a length of 9mm or 6mm pipe (according to the grommet used) is then pushed through the grommet. Push the pipe all the way through the grommet so that you can see the tube protruding inside the reservoir.
Autopot – 9mm Cross Connector
