LUMii – Heavy Duty Extension Lead
The LUMii Reflector Extension Lead is available in 0.4m, 1.5m & 5m lengths. Suitable for use with all LUMii and IEC reflectors. When using extension leads for HID, please make sure your ballast is built to ignite the lamp over long distances.
LUMii Ballasts are able to ignite a lamp from up to 15 meters from the ballast.
LUMii – MAXi Reflector Heavy Duty Cord Set
Lumii – Sunblaster Super HPS
LUMii lamps are designed to promote optimum development at each plant growth stage. The arc tube dosing technology achieves more usable light energy without sacrificing intensity or lamp life. With added red in the spectral output for bountiful flowering and maximum harvest, they boast 24,000 life hours.
Spectral output changes in a HPS lamp as it ages – therefore we recommend changing your lamp every 9-12 months for optimum growth conditions.
We recommend using the LUMii Sunblaster lamps with all the LUMii Ballast range as we design our units to be optimised with these mix spectral high output lamps.
ALL HID LIGHTING SYSTEMS REQUIRE A BALLAST TO RUN THE LAMP!
LUMii – X LED Controller
The LUMii XLED Controller is designed to control the LUMii XLEDv6 680w LED fixture but can control any LED fixture which accepts 0-10V control signal. When connected to an RJ12 port, (or by wired connection to push-in terminals) it will schedule a desired daily photoperiod, control the light intensity (dimming) from 0% to 100%, and set the length of sunrise and sunset ramping. With its single channel, it will control a linked array of up to 25 LUMii XLEDv6 680w LED fixtures. The controller uses a very simple five-button control interface with LED display. It has an integral wall mounting / hanging tab and is powered from mains electricity via an adaptor plug (supplied).
LUMii – X-LED V6 680W Fixture
LUMii XLEDv6 680w LED fixture is a high-performing, high-efficiency mid-range 6-bar LED fixture. Lightweight and easy to install. Supplied with a constant current driver which has fold-out brackets enabling it to sit on the upper face of the fixture. The driver has a manual dimming dial and RJ12 ports to allow external 0-10V control, and daisy chain connection of an array of fixtures. On each light bar the LED chips are positioned with greater density near the outer ends of the bar, to give a more even spread of light over the crop. The open construction of the fixture and its very low heat output assist airflow and heat management. Produces full spectrum light ideal for both growth and bloom. Hanging slings and a 3m RJ12 data cable included.
Lumii 315w Solar CDM
With blinding intensity, the LUMii Solar 315w CDM Lamps deliver a light spectrum that mimics that of natural sunlight indoors and plant's love it. Not only do the LUMii Solar 315w CDM Lamps run with incredibly intensity they offer your plants greater levels of plant useable light, that can be lacking in other lamps due to their full spectrum profile. The LUMii Solar 315w CDM Lamps are available in two specific spectrums, covering both the growing and blooming phase of a plants life cycle, resulting in happier plants with bumper harvests of superior quality end product.
Lumii Aerotube Cooltube Reflectors
Cooltube reflectors have long been a favourite of growers, and for good reason: they reduce the risk of heat damage caused by high intensity discharge lighting. This reflector is beneficial in keeping your temperature at a constant level, and stops extreme heat from destroying all your hard work. They remove 90% of the heat from your chosen lamp and increase maximum rated lumen delivery.
The Aerotube reflector is air-tight, with a fully sealed glass tube for your lamp to be mounted in. The external 2-part reflector is clipped on to the top of the cool tube, and is easily assembled.
Lumii Black – 720W LED With Ballast
If you need good quality LED lighting at the best price, the LUMii BLACK 720W LED 6 Bar Fixture is a great choice!
Powered and controlled by the LUMii BLACK 600W Electronic Ballast (sold separately, or with the LED Fixture as a kit), this high-performing, high-efficiency LED 6 Bar Fixture can be used singly or as part of a lighting array. Lightweight and easy to install, if hung by means of LUMii Rope Ratchets the height of the fixture can be adjusted as your plants grow.
Lumii Black 2 – 720w/960w LED
This LED grow light fixture has a stunning operating efficacy of around 2.9 µmol/J, and is built using LED chips with individual efficacies of 3.4 - 3.7 µmol/J. It’s maximum PPF output is an impressive 2596 µmol/s when powered at 960 W (by two ballasts each drawing 480 W). By comparison, a 1000 W HPS lamp (drawing 1070 watts) will typically give an output of 1550 µmol/s PPF.
A very versatile, high-performing, high-efficiency mid-range LED fixture. Lightweight owing to not having an integral driver, it is easy to install. The fixture is made up of two interlocking halves, each having its own power input socket, and it can be hung either as a single interlocked 6-bar fixture or as 2 separate 3-bar fixtures. The 6-bar fixture is ideally suited to cover a growing area of 1.5 m x 1.5 m, whereas 2 separate 3-bar fixtures can cover a growing area up to 25% larger.
Whether hung separately or interlocked, the 2 half-fixtures can be powered by a single LUMii BLACK 600 W Electronic Ballast using the splitter lead provided. Alternatively, each half fixture can be powered by its own LUMii BLACK 600W Electronic Ballast. Using 2 ballasts allows the maximum light output of the fixture/s to be increased by at least 25%.
A single ballast can be mounted on the 6-bar fixture, using brackets provided, but if the fixture is hung as 3-bar fixtures, or if 2 ballasts are used, they must be positioned remotely. The open construction of the fixture/s and the very low heat output assist airflow and heat management. Producing full spectrum light ideal for both growth and bloom, the LUMii BLACK² 720/960 LED will give impressive results.
Lumii Black 4 Way Contactor Timer
The LUMii BLACK contactor timer is a simple and cost-effective solution for grow light scheduling, ensuring that plants get the optimum levels of lighting throughout the day. The mechanical timer is easy to programme in 15-minute increments, while the relay switch safely turns on HID lights without causing a power surge or overloading the timer.
The lightweight, flexible power bars take up to 13 Amps each (available in 4-way and 8-way), for maximum efficiency we recommend running no more than:
• 3 x 600 W per 4-socket power bar
• 4 x 400 W per 4-socket power bar
• 4 x 315 W per 4-socket power bar
To set up, simply push the timer pins down to indicate “ON” periods, centrally position the ON/OFF switch onto “timer” mode, plug in ballasts to the 4-socket power bars and plug both contactor timer plugs into 2 x 13 Amp mains supplies sockets.
LUMii Extension/Link Lead – 1.5m
